Description

GET THE PORTABILITY OF A HAND TOOL WITH THE STAMINA OF A POWER TOOL!
FEATURES
• Ergonomic design allows one-handed operation
• Die automatically opens when crimp is complete
• Indicating complete crimp pressure cycle has been achieved
• Head rotates 350 degrees
• Red LED to display the charge
status of the battery
CRIMP CAPACITIES
• #26 to #10 AWG (copper terminations)
• Max. Crimp Force: 1.5 Tons (13.3 kN)
• Avg. Crimp Time: 2 seconds • Avg. Crimps per Charge: 200 • Charge Time: 15 mins (Avg.)
SPECIFICATIONS
• Length: 14.5″ (368 mm)
• Width: 2.87″ (72.9 mm)
• Depth: 4.5″ (114.3 mm)
• Weight (with battery):
3.18 lb (1.4 kg)
• Sound Level: 75 db(A) at 1 meter
• Vibration: <8.2 ft/s2 (2.5 m/s2) • Hydraulic Oil: Shell Tellus® T-15 TOOL INCLUDES:Carrying Case, Gage, Die Removal Tool, Two 18v Batteries (p/n HDE-LI-B), One Battery Charger (p/n HDE-LI-120C). Dies must be ordered separately. DMC is pleased to present our battery powered hydraulic tools to crimp copper and aluminum cable #26 to #10 AWG with DMC “Y” Dies (M22520/5-XX and others). These tools are equivalent to DMC’s HX4 hand tool and use the same Y-dies. Working on today’s electrical systems calls for increased mobility and repeatable, consistent crimping force. To satisfy this need, DMC offers a battery powered hydraulic crimp tool designed to integrate your current tooling systems. The erg- onomic tool body helps reduce workplace injuries and eases operator fatigue keeping costs low and production high. DMC battery powered tools have been engineered to work with our existing Y-die series and compliment our established crimp tools. And, as always, if we don’t have a die to meet your needs, we will engineer and manufacture it for you. Adjustable Crimping Dies accept terminations which conform to AS7928, AS25036 (class 1 and 2) and other military or commercial specifications. HXE4B The HXE4B Battery Powered Hydraulic Open Frame Crimp Tool is a hand held, self-contained crimp tool. The crimp head, battery, and pump unit are contained in one ergonomic tool body and weighs about 4 pounds. It is equivalent to DMC’s HX4 hand tool and uses the same Y-dies. (See pages 80-83) HXE4AB This tool is available with an optional spring loaded push rod to hold the product in the crimping position (dies normally closed). (P/N HXE4AB) HXE4B-230 The HXE4B-230 230V version.